Electrical Connection - WIKA TF45 Mode D'emploi

3. Installation, Removal / 4. Electrical connection
3. Installation/Removal
3.1 Installation
The insertion thermometer must be installed in such a way that the permitted
operating temperature (ambient, medium) is neither exceeded nor is lower than
permitted with regard to convected and thermal radiation.
3.2 Removal
Risk of burns!
The thermometers may only be removed from plant components
which are free from pressure!
During removal there is a risk of hazardous media escaping.
The instrument should be allowed to cool down sufficiently before removing the
insertion thermometer!

4. Electrical connection

Observe the relevant regulations for electrical installation.
Only connect the instrument when it is not powered!
4.1 Cables and Wiring
Fine gauge stranded cables are supplied with ferrule-ends.

The cable used must comply with the relevant requirements with respect to

stability and temperature.
The connecting cable must be run in such a way that the possibility of

mechanical damage is eliminated.
WIKA Operating Instructions OEM Insertion Thermometers Model TF45
GB
5