Télécharger Imprimer la page

GreenWorks BL60L253 Manuel D'opérateur page 12

Publicité

6
TRANSPORTATION, STORAGE AND DISPOSAL
6.1
TRANSPORTATION
• Any removable (electronic) parts, such as the charger and battery, should always be disconnected before
transport.
• Avoid transporting the product in bad weather conditions when possible.
• Make sure to adequately cover any exposed electronic parts if transportation in adverse weather conditions is
unavoidable.
• Use tape on open contacts of the battery and ensure it is securely stowed to prevent movement.
• High speeds, along with wind, and rain may force moisture into the electronic components, which can lead to
temporary malfunctions or permanent defects.
• In case of malfunction occurring after transport in such conditions, remove the battery and allow all parts to air-dry
when you reach your destination.
6.2
STORAGE
If the product is left unused for an extended period, proper storage maintenance is required.
• Store the product locked up to prevent unauthorized use or damage.
• Store the product in a dry, well-ventilated area.
• Store the product out of the reach of children.
6.3
DISPOSAL OF THE BATTERY, BATTERY CHARGER, AND PRODUCT
Symbols on the product or the package of the product mean that the product is not domestic waste. Recycle it at
a recycling station for electrical and electronic equipment. This helps to prevent damage to the environment and
persons.
Get in touch with your local authorities, domestic waste service, or your dealer for more information about how to
recycle your product.
7
TROUBLESHOOTING
PROBLEM
POSSIBLE
CAUSE
The battery is
not installed
tightly.
The battery is
out of power.
The product
does not start.
The switch is
defective.
The motor is de-
fective.
The PCB board
is defective.
The air does
not flow
The air inlet or
through the
tube outlet has a
tube when you
blockage.
start the prod-
uct.
English
8
POSSIBLE
Voltage
SOLUTION
Air volume
Make sure that
Air speed
you securely in-
set the battery
Battery model
in the product.
Charge the bat-
Charger model
tery.
The recommended ambient temperature ranges:
Replace the de-
fective parts
Situation
through an au-
thorized service
Product storage
center.
Product operation
Battery charging
Carefully re-
Charger operation
move the block-
age.
Battery storage
Battery discharging 32 °F (0 °C) ~ 113 °F (45 °C)
11
TECHNICAL DATA
60V
660 CFM (0.31 m
180 MPH (80.46 m/s)
LB6025, LB60251 and other BAC
series
CAC801 and other CAC series
Temperature
32 ˚F (0 ˚C) ~ 113 ˚F (45 ˚C)
32 ˚F (0 ˚C) ~ 113 ˚F (45 ˚C)
39 ˚F (4 °C) ~ 104 ˚F (40 ˚C)
39 ˚F (4 °C) ~ 104 ˚F (40 ˚C)
32 ˚F (0 ˚C) ~ 113 ˚F (45 ˚C)
EN
3
/s)

Publicité

loading

Ce manuel est également adapté pour:

Blc404