Publicité
Pausing
When the robot vacuum is running, press any bu on to pause. Press the bu on
to resume cleaning.
Note: The robot vacuum will enter sleep mode a er being paused or in standby mode for five
minutes. Press any bu on to wake it up.
Adding Water or Cleaning the Mop Pad
When the robot vacuum is working, pause it first then remove the 2-in-1 dust
compartment with water tank to add water or clean the mop pad. Then reinstall
the 2-in-1 dust compartment with water tank and press the bu on
the task.
Docking & Charging
When the robot vacuum is working, press the bu on
press the bu on
again to send the robot vacuum to return to the dock to
charge.
When the robot vacuum is in standby mode and not connected to the charging
dock, press the bu on
to send the robot vacuum to return to the dock to
charge. When a task is complete or the ba ery is too low, the robot vacuum will
automatically return to the dock to charge.
DND mode
In the do not disturb (DND) mode, the robot vacuum does not resume cleanup,
perform scheduled cleanups or play voice prompts, and the indicator turns off
a er one minute of charging. The DND mode can be enabled or disabled in the
app.
Note: Please refer to the app for more features, including Clean There, Resume Cleanup,
Scheduled Cleanup, and Virtual Walls.
Notes:
When using the robot vacuum for the first time, please follow the in-app prompts to
complete quick map creation. To ensure accurate mapping, it is recommended to follow the
robot vacuum and remove any obstacles on the ground when it is creating the map. Make
sure the robot vacuum starts from the charging dock.
If the robot vacuum may get stuck or scratch the surface of the furniture in some areas, you
can set restricted areas in the app to prevent the robot vacuum from entering those areas.
Care & Maintenance
2-in-1 Dust Compartment with Water Tank and Filter
1. Remove the 2-in-1 dust compartment with water tank and remove the filter.
to resume
2. Remove any debris and clean the 2-in-1 dust compartment with water tank
to pause the task, and
CAUTIONS:
3. Clean the filter with the cleaning brush.
Note: The filter can be rinsed with water. Make sure it is completely dry before reinstalling.
Frequent rinses are not recommended.
11
with the cleaning brush.
Do not rinse or soak the 2-in-1 dust compartment with water tank.
Regularly clean the 2-in-1 dust compartment with water tank to prevent dirt buildup. This
will help maintain optimal performance.
Publicité
