Publicité
2. Thread the diverter collar onto the
valve. Use the two long screws to
secure the PBV collar to the valve
(ill. 1).
Make sure the wide straight edge of
the diverter collar is oriented on the
bottom.
3. Install the plate
to the valve body inside
the wall using 4 screws
ATTENTION:
Position the plate with the UP
arrow facing upwards (ill. 2).
Hand tighten the screws, but
DO NOT over tigthen to avoid
cracking the plate.
4. Secure the PBV adapter to the
PBV valve with the screw and
lock washer. Then secure the
Diverter adapter to the Diverter
valve with the screw (ill. 3).
ATTENTION:
Position the arc surface of the diverter adapter
facing up and align with the valve stem to
ensure a full t.
INSTALLATION PROCEDURE
ill.1
Valve
ill.2
Valve
ill. 3
Valve
PBV Adapter
4
Finished wall
Diverter
Collar
PVB Collar
Screw
Plate
Screw
(4 pcs.)
Diverter
Adapter
Screw
Screw
Lock washer
Publicité
