Publicité
CLOSED OR OPEN FRONT - EXPLORER
Your treestand is designed to "nest" together as one unit making it easy to transport.
1. Untie the umbilical cord from the seat climber and wrap it around the platform yoke several times to secure it.
2. Remove the safety pin and latch pin from both the seat platform and foot platform. Fold the RapidClimb stirrups up so that
they are parallel to the frame. Fold both platforms flat.
3. Position the platform as shown in figure 52.
4. Place the seat climber on top of the foot platform with the V-brace facing down as shown in figure 53. It may help to twist
the set up side down so that the backrest points toward the V-Brace.
5. Wrap the 1" wide green strap around the frame and cinch tight. See figure 54.
Your backpack straps are adjustable. Pull down on the free end to tighten and lift up on the buckle to loosen.
52
54
PG 18
All manuals and user guides at all-guides.com
53
www.summitstands.com
Publicité
