Publicité
General Problems
Problem
Poor picture quality while watching TV
and using a device such as a DVD
player or a VCR
36
Troubleshooting Your TV
All manuals and user guides at all-guides.com
Possible Solution
Check the aspect ratio settings in the TV Menu. Press the Menu
1
button on the remote control and select Size. For more
information on using the TV Menu, see "Using the TV Menu"
on page 27.
Reconnect the device using the same type of connector. For
2
example, if you are using the composite connector on the
bottom, try connecting the device to the composite connector
on the left of the TV. See "About Your TV" on page 5 for the
location of the connectors.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 28 for more information.
Connect the device using a different connector. For example, if
3
you are experiencing the problem using a composite connector,
try using the component connector.
NOTE:
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 28 for more information.
Reset the original factory defaults. Press Menu button on the
4
remote control, select Setup, and then select Factory Reset.
Adjust the color temperature. Press Menu button on the remote
5
control, select Picture Settings, and then select Color
Temperature.
NOTE:
documentation for more information.
To connect to a different connector, you need the
Some set top boxes offer aspect ratio. See your device
Publicité
