Hitachi WR 16SA Mode D'emploi Et Instructions De Securite page 9

FUNCTIONAL DESCRIPTION
NOTE:
The information contained in this Instruction Manual is designed to assist you in
the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first
read and understood all safey instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments
that differ from those on your own power tool.
NAME OF PARTS
SPECIFICATIONS
Motor
Power Source
Current
No-Load Speed
Capacities
Tightening Torque
Square Drive
Weight
All manuals and user guides at all-guides.com
Air Vents
Housing
Hammer
Case
Anvil
Switch
Handle Cover
Fig. 1
Single-Phase, Series Commutator Motor
Single-Phase, 120 V AC 60 Hz
4.8 A
1,900/min
15/32" – 5/8"(M12 – M16) (High tension bolt)
15/32" – 7/8"(M12 – M22) (Ordinary bolt)
Maximum 270 ft-lbs (36.7 kg-m)
1/2" (12.7 mm)
6.2 lbs (2.8 kg)
Nameplate
Brush Cap
(inside the tail cover)
Tail Cover
English
9