Input Renaming - Nagra CLASSIC INT Manuel De L'utilisateur

Language

Input renaming

You have several characters available to name the CLASSIC INT
inputs. Name can include letters, numbers and special signs.
The characters are available in the following order:
a...z_-*#/,.:;0123456789_A...Z
When inside the menu, rotate the knob until « In. Names »
displays.
In.Names
Edit
XLR
this input.
RCA 1
For instance, let's change RCA 1 name into CDP i.e. CD Player.
Press the controller knob once. The underscore appears below the
letter to be changed i.e. « R ».
By rotating the knob, you will scroll all the characters in the
following order : a...z_-*#/,.:;0123456789_A...Z
CCA 1
CDP
If you want to exit the menu, press and
hold the knob for 2 seconds at least.
Press the controller knob to get inside this
setting.
« Edit » displays. Press the knob once to
access input names modification. You can
now edit names.
XLR is the first displayed input, it is its
default (factory) name. You could choose
the new name to be displayed if you select
Keep turning the knob if you wish to edit
and modify another input name i.e. RCA 1
(right after XLR).
Select C then press the knob to go to the
next character i.e. « C ».
Now simply press and hold the knob for a
few seconds to record the new name and
to get back to the « In. Names » menu.
38
NAGRA – CLASSIC INT