Menu Tree Structure; Language Setting - Nagra CLASSIC INT Manuel De L'utilisateur

Menu tree structure

Here is the menu tree structure that will help you localizing the
function you are looking for. It may look complex but actually once
you have completed the set-up of your CLASSIC INT, you won't
need to change it often or at all!
Language/Langue
In. Names/Noms Ent
Remote/Appareil
About/À propos

Language setting

You might want to start by setting the language of your country.
First, press and hold the controller knob for 3 seconds at least. The
following message displays :
Langue
English
Then rotate the knob again to return to the previous display
« Language » in the menu.
English
Français
Edit/Editer
Restore/Restaure
RC-5
DEVICE 1
DEVICE 2
DEVICE 3
DEVICE 4
DEVICE 5
DEVICE 6
Soft V. / Version
Op. Time / T total
S.Number / N. Série
Amp Temp / T=x°C
Then press the knob once to enter the
language menu then select the language
by rotating the knob.
When the desired
press the knob once to select it.
37
NAGRA – CLASSIC INT
XLR
RCA 1
RCA 2
RCA 3
RCA 4
language displays,