Ground Terminal; Remote Connection - Nagra CLASSIC INT Manuel De L'utilisateur

Ground terminal

Remote connection

Connect the « AMP » output of the MPS to the Remote « IN » of
your CLASSIC INT. You can use the Remote « OUT » of your
CLASSIC INT
In some specific situations the ground
terminal
different pieces of equipment then to
avoid unwanted earth-loop hum.
Your Nagra dealer will advise you
during set-up whether this connection
needs to be used.
The CLASSIC INT can be turned ON
and OFF with an external signal
from a Nagra MPS.
to trigger
33
NAGRA – CLASSIC INT
can be used
another Nagra
to connect
device.