Inputs - Nagra CLASSIC INT Manuel De L'utilisateur

Inputs

The CLASSIC INT is a fully balanced amplifier thus it has one stereo
XLR input. If your source is unbalanced, you can use one of the
four unbalanced RCA inputs provided.
Sensitivity
Depending on the source, you can adjust the sensitivity of the XLR
input and the RCA1 input. This will guarantee a perfect match with
your source.
On the XLR input, when switched to NORMAL, the amplifier will be
able to drive signals from 0V to 2V. When switched to PRO, it can
drive signals up to 10V.
On the RCA1 input, when switched to NORMAL, the amplifier will be
able to drive signals from 0V to 2V. When switched to HIGH, it can
drive signals up to 3V.
All the other inputs can drive signals from 0V to 2V but the
sensitivity cannot be adjusted.
32
NAGRA – CLASSIC INT