Speaker Outputs; Connecting The Power Cord - Nagra CLASSIC INT Manuel De L'utilisateur

Speaker outputs

The CLASSIC INT can be used with two types of loudspeaker cable
connectors : banana or spade.
Right
loudspeaker

Connecting the power cord

Make sure the mains switch is in the 0 (OFF) position prior to
connecting the power cord.
Connect the speaker cables on
the LEFT and RIGHT Cardas
connectors if spades are used.
If cables are fitted with banana
plugs,
connectors.
Left
loudspeaker
Mains switch: when set to the 0 position
(picture), the amplifier is totally OFF and
does not draw any current from the mains.
Fuses holder
IEC connector
34
NAGRA – CLASSIC INT
use the white