Publicité
4. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
LED touch display
1
Splash protection
2
Fill level mark (max. 5.5 l)
3
Foot rest with massage nodules
4
Bubble bar
5
Massage roller attachments (6 pieces)
6
Pedicure centre
7
Portable pedicure device
8
Brush attachment
9
Massage attachment
10
ON/OFF button
11
5. USE
Initial use
1. Remove the packaging, including the film protecting the display.
2. Check the complete scope of delivery (including packaging) for damage.
3. Before plugging the foot bath in, fill it with cold or warm water up to the fill level mark
high). The foot rest part must be completely submerged under water.
4. Place the foot bath on a firm and level surface.
5. Ensure that the mains cable does not pose a trip hazard.
6. Insert the mains plug into a suitable socket. The ON/OFF button
standby mode.
Using the foot bath
1. Sit in a comfortable position. Never use the foot bath standing up.
2. Place your feet in the foot bath. The rubber feet on the base of the device prevent the foot bath from
slipping.
3. Press the ON/OFF button
display
shows the current water temperature. The foot bath is now ready for use.
17
4. The massage is especially effective if you move your feet back and forth over the massage roller attach-
ments
in the foot rest.
6
12
13
14
15
16
17
18
19
20
21
22
to switch the foot bath on. The ON/OFF button
11
"Increase water temperature" /
"Switch water heating on" function button
"Decrease water temperature" /
"Switch water heating off" function button
"Vibration" function button
"Programs" function button
"Bubble" function button
Water temperature / timer time display
"Timer" function button
Cable outlet
Cord winder
Rubber feet
Storage / drying bag
11
16
(approx. 5 cm
3
starts to flash. The foot bath is in
lights up and stays lit; the
11
Publicité
