Publicité
QUICK CHARGER DE9115
Table of contents
Technical data
Manufacturer's declaration
Safety instructions
Package contents
Description
Electrical safety
Mains plug replacement (U.K. & Ireland only)
Using an extension cable
Instructions for use
Maintenance
Guarantee
Technical data
Mains voltage
Output
Charge current
normal mode
equalise mode
maintenance mode
Charging time
2 Ah packs
1.7 Ah packs
1.3 Ah packs
Weight
Fuses:
Europe
230 V tools
U.K. & Ireland
230 V tools
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard!
9
All manuals and user guides at all-guides.com
en - 1
en - 1
en - 2
en - 2
en - 2
en - 2
en - 3
en - 3
en - 3
en - 3
en - 4
DE9115
V
230
V
6.0 - 14.4
DC
A
7.5
mA
120
mA
40
min
20
min
15
min
10
kg
0.9
10 Amperes, mains
13 Amperes, in plugs
Manufacturer's declaration
DE9115
D
WALT declares that this unit has been designed
E
in compliance with: 89/336/EEC, 89/392/EEC,
73/23/EEC, EN 60335, EN 55014, EN 55104 &
EN 50144.
For more information, please contact D
the address below or refer to the back of the manual.
This unit must not be put into service until it was
established that the Power Tool to be connected
to this unit is in compliance with 89/392/EEC
(identified by the CE-marking on the Power Tool).
Director Engineering and Product Development
Horst Großmann
D
WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
E N G L I S H
WALT at
E
en - 1
Publicité
