Publicité
Band toolkit
EN
Note: This toolkit is only suitable for a metal wristband with a folding clasp.
FR
DE
1
Adjust the wristband on your wrist or use the
tape measurer provided to estimate the num-
ber of mesh links to be removed.
Note that one of the links is smaller in order to
adjust the bracelet more finely.
2
Position the wristband in the HOLDER.
The arrows inside the wristband should
point downward.
Band toolkit
4
3
Remove the second pin. Re-
move the mesh.
Repeat if necessary.
Use the pin punch and the hammer to
push out the pin that supports the mesh
you want to remove.
EN
FR
DE
5
Reassemble the wristband by replacing one
of the pins, then the other (in the opposite
direction of the arrows) with the hammer.
Publicité
