Publicité
PROGRAMMED
EDIT RECORDING
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
IF '"
.—
4
—
il —i
1
2
3
4
5
6
Insert the tape into deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit. Wind up the tape with the <
button.
Press the CD button and load the disc(s).
Press
the
EDIT/CHECK
button
twice
while
pressing the SHIFT button on the remote control.
'(EDIT' and "PRGM" is displayed.
.
when "AI" is displayed, press the EDIT/CHECK button
while pressing the SHIFT button again.
Press
the numbered
buttons
on the remote
control to designate
the tape length.
10 to 99 minutes can be specified.
Maximum recording
Tape length
time for side A
Tape side A (front side)
Press one of the DISC DIRECT PLAY buttons to
select a disc.
Then, press the numbered
buttons and the + 10
button on the remote control to program a track.
Example: To select the 10th track of disc 2, press the DISC
DIF?E(;T PLAY 2 button, then press the + 10 and O buttons,
Programmed
tracks
Tape side A
Remaining
time of side A
Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
7
8
9
Press the EDIT/CHECK
button while pressing
tlhe
SHIFT button on the remote control to select silde
B and program the tracks for side B.
After confirming B on the display, repeat step 5.
Tape side B (reverse side)
Press the EDIT/CHECK
button while pressing
tlhe
SHIFT button to select side A and press the
button on deck 1 to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the end of tape is reached, deck 1
enters the recording stop mode, After entering the recording
stop mode, go to step 9,
Press the EDIT/CHECK
while pressing the SHIFT
button on the remote control for recording
of
the second side.
After confirming B on the display go to step 10.
10 Turn over the tape in deck 1, and press the O
button to start recording.
Recording starts.
To
stop
recording
Press the W4
button on deck 1. Recording and CD play stop
simultaneously.
To check the order of the programmed
track numbers
Before recording, press the EDIT/CHECK button while pressing
the SHIFT button on the remote control to select side A or B, and
press the +
or >
button repeatedly.
Programmed
track
Tape side
numbers
I
Track number
Program number
To change the program of each side
Press the EDIT/CHECK button while pressing the SHIFT button
on the remote control to select side A or B, and press the
CLEAR button to clear the program of the selected side. Then
program tracks again.
To clear the edit program
Press the
button twice so that "EDIT" disappears on the display.
m
Up to 30 tracks can be programmed from any of the inselted
discs.
ENGLISH
I
4
Publicité
