Publicité
BASIC RECORDING
This section explains how to record from the tuner, CD player, or
external equipment.
"2
Prepalraition
Use 'Type I (normal) tapes only.
Set the tape to the point where recording will start.
s Note that recording is done only one side of the tape.
1
2
3
To record selected tracks of the CD
Before pressing the
button, program the tracks (see
palge
lo).
To start recording precisely (except when recording from
a CD)
Before pressing the
button at step 3 above, press the II
button on deck 1. Then, press the
button. The deck enters
recording pause mode. To restart recording, press the [I button
again.
To record part of the CD
When the
button is pressed, recording always starts from
ithe
first track, To start in the middle of a track, play the CD first and
press the II button for CD at the point to start recording frc}m,
Then, press the
button. The pause mode for CD is released
automatically and recording starts.
m
Do not press the buttons on deck 2 during recording.
Insert the tape to be recorded on into deck 1.
Insert the tape with the side to be recorded on first facing
out from the unit.
Prles:s one of the function
buttons
and prepare
the source to be recorded.
To record from a CD, press the CD button and load the
disc(s).
To record from a tape, press the TAPE button. Then insert
the original tape into deck 2 and play it.
To record from a radio broadcast, press the TUNER/BAND
butter and tune in to a station,
To record from a connected source, press the VIDEO/AUX
button and play.
Press the
button to start recording.
The IIF button is depressed simultaneously.
-
When the selected function is CD, playback and recording
start simultaneously.
To stop recording, press the W=
button on deck 1.
To pause recording, press the II button on deck 1. To resume
recording, press it again.
To erase a recording
1 Insert the tape to be erased into deck 1 and press the TAPE
button.
2 Wind up the tape to the point where the erasure is tc) be
started.
3 Press the
button to start the erasure.
ENGLISH
12
Publicité
