Publicité
Comfort Liner Removal
1. To properly remove the comfort liner plastic sleeves, slightly lift the plastic shell base in the order of A, B, C and
gently pull the comfort liner fabric.
2. Repeat same at rear.
Comfort Liner Installation
1. Install the front section first by aligning the plastic shell base and the comfort liner plastic sleeve, ensuring that the center
and side holes are properly aligned. Press the comfort liner plastic sleeve (center portion) into the center of the channel
which is built into the plasticshell base, working your way outward to each side.
2. Align and snap the two rear snaps into place.
Try not to operate the sun shield while riding as this may impair your vision and may lead to an accident.
DO NOT pull on the sun shield when it is already down. The sun shield may be ejected and this will increase
the risk of serious injury or death in the event of an accident.
DO NOT attempt to adjust the sun shield itself with your hands. Always use the sun shield lever.
DO NOT use sun shield at night time. The sun shield is only for day time use. The sun shield does not provide
eye protection. When you use the sun shield be sure that the clear visor(shield) is also in closed position.
Sun shield Operation
Above illustration shows raised
sun shield position.
Lever
11
Above illustration shows lowered
sun shield position.
Sun shield Removal
1. Grasp and pull the center of the sun shield by reaching inside the helmet through the bottom opening.
2. With the center portion of the sun shield released from its mount, pull the sun shield completely free
from the helmet through the eye port.
Sun shield Installation
1. Push each side into place, aligned with the pivot tabs.
2. While holding the sun shield lever in 'lowered position' insert the center hook into the center buckle using the other hand.
Pivot Tab
Opening Chin Bar
1. To open the chin bar, simply pull the lever forward and push the entire bar upward.
2. The chin bar is in the full open position when you hear " click" sound.
Lower and lock before you leave: Never ride with the chin bar in the raised position. Please use care
when opening or closing the chin bar as it may scratch the helmet. Damage caused by this is not
subject to manufacturer's warranty.
Closing Chin Bar
The chin bar must be kept closed and locked while riding.
Pull the chin bar downward to completely cover your face and chin. Listen for "click" sound to ensure
that the chin bar has locked into its full closed position.
Center Buckle
Center Buckle(B)
Sun shield
Make sure tabs & center buckle are secure in order
for sun shield to function properly.
12
Publicité
