Télécharger Imprimer la page

Moulinex Multicook & Fry MZ730BF0 Mode D'emploi page 9

Publicité

Sauté (Manual programming)
• Press Arrow key up / down to select function «Saute». The screen
displays the default cooking time
• Press «Time» key to activate the time setting function and then press
Arrow key up / down to change the cooking time. Press «temp» to
change the temperature by pressing Arrow key up / down to adjust
temperature
• Press «Start» key. Launch the cooking program, the «Start» light comes
on and the screen displays the time.
• Press «Stop» key to stop the cooking program
• At the end of cooking, the Beep will sound to indicate the program has
finished.
• Keep warm : No auto keep warm for this recipe, user can manually turn
it on by pressing keep warm button
Slow cook
• Press Arrow key up / down to select function «Slow cook». The screen
displays the default cooking time
• Press «Time» key to activate the time setting function and then press
Arrow key up / down to change the cooking time. Press again «temp»
to change the temperature by pressing Arrow key up / down to adjust
Temperature
• Press «Start» key. Launch the cooking program, the «Start» light comes
on and the screen displays the time.
• Press «Stop» key to stop the cooking program
• At the end of cooking, the Beep will sound to indicate the program has
finished.
• Keep warm : up to24 hours, be sure to put enough liquid in the pot to
avoid burning the bottom of the pot and drying up the food
Steam
• Press Arrow key  up / down to select function «Steam». The screen
displays the default cooking time
• Press «Time» key to activate the time setting function and then press
Arrow key  up / down  to change the cooking time.
• Press «Start» key. Launch the cooking program, the «Start» light comes
on and the screen displays the time after pre-heating.
• Press «Stop» key to stop the cooking program
16
• At the end of cooking, the Beep will sound to indicate the program has
finished.
Reheat
• This function is intended to reheat only cooked food.
• Press Arrow key up / down to select function «Reheat ». The screen
displays the default cooking Time
• Count with Max 1 hour for time , not able to adjust the time setting
• Press «Time / temp» to change the temperature by pressing Arrow key
up / down to adjust Temperature
• Press «Start» key. Launch the cooking program, the «Start» light comes
on and the screen displays the time.
• Press «Stop» key to stop the cooking program
CAUTION
• The cold food should not exceed 1/2 of the cooker's volume. Too
much food cannot be thoroughly heated. Repeated use of "Reheat"
or too little food will lead to burnt food and hard layer at the bottom.
• It is recommended not to reheat thick porridge, or it may become
pasty.
• Do not reheat long-stored cold food to avoid smell.
KEEP WARM
1. Keep warm function:
1.1 Manual Keep warm:
• You can press «Keep warm» key manually, the "Keep Warm" light
comes on, the multicooker enters into keep warm status.
1.2 Automatic keep warm:
• The multicooker will enter "keep warm" status automatically at
the end of the cooking (certain menus are excluded). The beep
will sound to indicate the program has finished.
• Then the multicooker will enter automatically into keep warm
status with the"Keep Warm" indicator turning on and the screen
will start to count the time of keeping warm.
• In case you need to pre-cancel the automatic keep warm when
the cooking finished : long press «Keep warm» for 5 s before
starting the cooking program. If you want to restart automatic
keep warm, press again during 5s the keep warm button.
EN
17

Publicité

loading