Publicité
Point2 Flexibilitv
KAC-Q62 is compatibie with a large variety of systems by combining the
switches and functions described in the following.
L——
SPEAKER OUT ——!
[1 Operation switch
This switch selects the input method of the signals to be
OPERATION
amplified by amps A and B.
s STEREO position
The input left and right signals are amplified separately. Use this position when the
unit is used as a stereo amplifier.
e MONO(L) position
The input left signal is amplified twice the normal boost level. Use this position
when the unit is used as a high-power monaural amolifier. (The input right signal is
STEREQ
MONO
(L)
not output.)
[2|Filter switch
|
o
These switches allow filtering of the output signals.
FILTER
s HPF(High Pass Filter) position (12dB/oct.
HF OFF
slope)
Only frequencies of 80Hz or higher are output. (Frequencies below 80Hz are cut.)
s OFF position
The original sound without filtering is output.
'3|Input sensitivity
Adjust this control according to the pre-out level of the center unit
connected to this amp.
INPUT
Center unit
Amplifier
NOTE
SENSITIVITY
pre-out level | input sensitivity]
Rafer to "Specifications" on
=
(4)
300 mV
| MAX (0.15 V) | the center unit's instruction
0.8
800-1000 mV|
03V
ee about the pre-out
MIN
MAX
1.5 V
0.5 V
i
4 English
Publicité
