Safetv precautions
AWARNING
Take the following precautions to
prevent fire and avoid personal injurv :
e When extending the power supplv cable
or ground cable, use 3mm? (AWG12) or
larger automotive grade cable to avoid
cable deterioration or damage to the
covering.
e Check that no metal objects (coins,
tools, etc.) are left inside the unit to
avoid short circuits.
e If you smell or see smoke, turn the
power off immediatelv and consult vour
Kenwood dealer.
e Do not touch the unit during use
because the surface of the unit
becomes hot and may cause burns if
touched.
ACAUTION
Take the following precautions to keep
the unit in proper working order.
e Be sure the unit is connected to a 12V
DC power supply with a negative ground
connection.
Do not open the top or bottom cover.
Do not install the unit in places it is
exposed to direct sunlight, high heat or
humidity, water may solash over it, or
dust exists.
e Be sure it is fastened securely and not
exposed to excess vibration.
e |f you need to replace the fuse, make
sure the new fuse is of the same type
and rating. Using a fuse of a different
type of rating may damage Your unit.
The fuse rating is normally shown on the
fuse and fuse box.
2 English
NOTE
e If you have difficulty in installing this unit
in your vehicle, contact your Kenwood
dealer.
Cleaning the unit
e |f the the surface of the unit is dirty,
wipe it clean with a silicon cloth or soft
dry cloth with the power off.
ACAUTION
Do not use nard cloths or paint thinner,
alcohol, or other volatile solvents. These
may damage external surfaces or
remove indicator characters.
FCC WARNING
e This equipment may generate or use
radio frequency energy.
Changes or
modifications to this equipment may
cause harmful interference uniess the
modifications are expressly approved in
the instruction manual.
The user could
lose the authority to operate this
equipment if an unauthorized change or
modification is made.