Publicité
Installation procedure
1. Remove the ignition kev and disconnect
the negative (—) terminal of the battery
to prevent short circuits.
2.Connect the input and output cabies of
the units.
3.Connect the speaker cables.
4A.Connect the ground cabie and power
supply cable in the order listed,
5. Install the unit in the car.
6. Connect ihe negative (-) terminal of the
batierv.
Accessories
Part name
Self-tapping screw
(> 4 x 20mm)
ACAUTION
e If the fuse blows, check cables for
shorts, then replace the fuse with one of
the same rating.
Connect the speaker cables to
appropriate speaker connectors
separately.
Sharing the negative cable
of the speaker or grounding speaker
cables to the metal body of the car can
cause this unit to fail.
e After installation, check that the brake
lamps, winkers, and wipers work
properly.
Number of
External view
tams
Euu
English 7
Publicité
