Installation
E Installation
Self-tapping screw
(ġ4
X 20mm)
Installation board, etc.
(thickness: 20mm or more)
ACAUTION
Do not install the unit under the carpet.
Otherwise heat build-up occurs and the
unit mav be damaged.
e Since the power amplifier has no parts which require operation, it can be
installed at a position away from the driver's seat without any hindrances.
As generally accepted positions for its installation, places such as inside the
boot, etc. can be considered.
ACAUTION
e Install this unit in a location which allows heat to easily dissipate.
Once installed, do not place any object on top of the unit,
e After installing the unit, check to make sure that electrical equipment such as
the brake lamps, winkers and wipers operate normally.
s Install the unit securely in a location that does not interfere with driving.
10 English