Vornado 660 Manuel D'instructions page 35

CLEANING
GRILL REMOVAL
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill.
1. Depress one of the grill clips (A) by placing your thumb
against the outside surface of the clip and pressing
downward towards the motor, applying slight pressure
forward. Usually by releasing one clip, the grill can be
removed. If the grill cannot be removed, repeat the process
on remaining clips.
A flathead screwdriver can also be used if the clips are
difficult to release.
2. Replace by lining up the clips with the holes and firmly
snapping the grill back into place.
A
Note: The motor is
permanently lubricated
and requires no oiling.
English
9