Vornado 660 Manuel D'instructions page 34

GETTING STARTED
STAND ASSEMBLY
(Model 783)
Screwdriver required
1. Attach Head Assembly
(A) to Extension (B) with
screw provided.
2. Attach Extension (B)
to Base (C) with screw
provided.
HEIGHT ADJUSTMENT
(28 - 40 INCHES)
Add extension (B) for full
40" tall product. Remove
extension (B) for 28" tall
product.
8
English
Screw
A
B
Nut
C
INSTALLING PROTECTIVE FEET
Use the feet to protect floors when using your air circulator on
uncarpeted surfaces such as hardwood, vinyl, or tile. The feet are
simple to install and will help maintain the whisper-quiet operation.
CUSHION RING FEET
(Model 723)
The cushion ring feet are
packaged separately in the
box. To install, roll all feet onto
the base and space evenly.
For balanced support it is
recommended to use 4 ring feet.
CUSHION PADS
(Model 733)
Use guide marks on base bottom
for location.
1. Place 4 pads over the 4 edge
bends.
2. Place 2 pads on each of the
curved ends.