5
Using your refrigerator
The operating temperature is regulated
by the temperature control.
Warm
1
2
(Or) Min.
0=System cooling is off.
1=Lowest cooling setting (Warmest
setting).
5=Highest cooling setting (Coldest
setting).
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according to
the desired temperature.
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also depends
on ambient temperature, the frequency
with which the door is opened and the
amount of foods kept inside.
C
Figures in this user manual are schematic and may not match the product
exactly. If the subject parts are not included in the product you have
purchased, then those parts are valid for other models.
Refrigerator/User Manual
Cold
3
4
5
Max.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended to
close the door again as soon as possible
after use.
The interior temperature of your
refrigerator changes for the following
reasons;
•
Seasonal temperatures,
•
Frequent opening of the door
and leaving the door open for long
periods,
•
Food put into the refrigerator
without cooling down to the room
temperature,
•
The location of the refrigerator
in the room (e.g. exposing to sunlight).
•
You may adjust the varying
interior temperature due to such
reasons by using the thermostat.
The MIN set is defined as the Winter
Setting for use at ambient temperatures
lower than 120C.
Do not use MIN set above 120C ambient.
• the combination of drawers, baskets
and shelves that result in the most
efficient use of energy for the
refrigerating appliance;
• clear guidance about where and how
to store foodstuffs in a refrigerating
appliance for best preservation over
the longest period, to avoid food
waste;
• a description of the effects of special
modes and features, and in particular
how temperatures are affected in
each compartment and for how long;
15 / 23 EN