Publicité
STEP 3
Install the Pedals.
Attach the Pedals (11) to the Pedal
tubes(6) respectively, secure in place
with the Hexagon bolts (44) and Nylon
nuts (45).
STEP 5
Install the Saddle and Saddle post.
Place the Saddle (65) over the Saddle
post (68), secure in place with the Flat
washers (66) and Nylon nuts (67).
Slide the Decorative Sleeve (69)
onto the Saddle post, then insert the
Saddle post into the Main section;
adjust to a proper position, secure in
place with the Tri-knob (70).
STEP 4
Install the Handle bars.
Insert the Handle bars (7L&7R) to the Coupler bars (4R/L) accordingly, select
a comfortable height for exercise, and make sure both Handle bars are at
a same level. Lock in place with Knob bolts(17).And cover with the cap(71)
42
Publicité
