Publicité
TECHNICAL DESCRIPTION
Model
Inertia disc
Maximum user weight
Product weight
Functions
Levels of effort
ASSEMBLY
STEP 1
Install the Stabilizers.
Attach the Stabilizers (2&3) onto the Main
frame (1), secure with the Carriage bolts (46),
Arc washers (42), and Acorn nuts (47).
Notice that the Front stabilizer (2) has wheels
for moving your bike.
Note: Both Pedals hinge bolts are labeled L FOR LEFT and R FOR RIGHT. To tighten turn the left bolt COUNTERCLOCKWISE and the right
bolt CLOCKWISE. Move the Crank to a proper angle for easily tightening the Bolts.
Important:
While you assemble this step, hold this "62R/L" part like the right drawing. The one with X mark is
incorrect. The "62R/L" part must be horizontal or it can't be put into the crankshaft.
Cross trainer
BELI-120
100 Kg
28 Kg
Time - Speed - Distance – Calories – Heart rate frequency
8 levels
STEP 2
Install the Coupler bars & Pedal arms.
A: Remove Washer (76), D shape washer
(56), Spring washer (52) and Bolts (57) from
the Handle bar shaft (12) on one side, mount
one Coupler bar (4Ror4L) to the Main section,
then attach the other side Coupler bar (4R
or 4L), and reinstall the D shape washer (56),
Spring washer (52) and Bolts (57).
B: Fit the Pedal tubes (6) to the Crank (27),
secure with the Pedal hinge bolts (62R/L),
Spring washers (51) and Nylon nuts (48). And
cover with caps (75)
41
5 Kg
BELI-120
EN
Publicité
