Publicité
BACK PANEL KIT
KIT PN 2878217
INSTALLATION INSTRUCTIONS
NOTE: If the Cab Roof Kit (No. 2878215) is already installed, remove it completely.
1. Apply the self-adhesive sealing foams (#2) on the bottom of the back panel (#1) as illustrated.
2. Slide the back panel assembly (#1) over the vertical
rear tubes of the cab frame.
Make sure that the sealing foam is completely
against the frame of the vehicle.
NOTE: Take care to install the back panel
perpendicular to the vehicle's floor.
Door installation is much easier.
7515126-521E
A-7515126 Rév. C
- 3 -
Imprimé en Chine / Printed in China
Publicité
