Publicité
EN
Fig.3
Fig.4
WARNING: IF ANY PART IS WORN OR DAMAGED, DO NOT CONNECT TO THE TOOL UNLESS YOU
HAVE FIRST REPLACED THE WORN OR DAMAGED PART.
Fitting the debris collection bag (Fig.5 and Fig.6)
Before installing the debris collection bag, make sure that the selector lever (blower/vacuum
mode) works smoothly and is not obstructed by debris from previous use. Attach the hook on the
collection bag to the tube (Fig. 5) and then locate the bracket of the debris collection bag to insert
the curve tube (Fig. 6).
Fig.6
Fig.5
Starting the tool
Before starting tool, make sure that the two pipes (vacuum/blower) together with the machine
body are correctly positioned.
Operation of the tool
Do not attempt to suck up wet debris. Allow fallen leaves, etc. to dry before using the tool. The
tool can pick up leaves, paper, small twigs and wood chippings. When operating the tool in
vacuum mode, debris is collected through the vacuum tube and collected in the bag. The debris is
partially shredded when it passes through the fan.
Warning! Any hard objects such as stones, glass containers, etc. will damage the fan.
Important
Do not use the tool to suck up water or very wet debris. Never operate the tool without the debris
collection bag.
9
WWW.NIKOLAOUTOOLS.COM
Publicité
