Télécharger Imprimer la page

Nakayama EB3500 Manuel D'utilisation page 11

Publicité

EN
MAINTENANCE, CLEANING AND STORAGE
Warning! Before carrying out any checks or maintenance work, unplug the tool from the mains.
Check the machine regularly before starting work. Ensure that all nuts, bolts and screws are tight and
that the protective fittings are correctly fitted. All damaged and worn parts should be replaced to
keep the tool safe for use. Never leave any material in the tool or in the debris collection bag. Injury
may result when starting the tool if material in the tool or in the debris collection bag is not removed
first.
After use, the tool must be thoroughly cleaned. Make sure that the tool is switched off and
disconnected from the power supply. Remove and empty the debris collection bag. Ensure that the
mode selector lever (blower-vacuum) operates smoothly and is not obstructed by debris. Remove any
debris stuck to the fan or tube with a brush.
Keep the ventilation slots in the motor housing clean at all times. Clean the motor housing only with a
damp cloth and do not use detergents or solvents. Such chemicals may damage the plastic parts of
the machine. Finally, carefully dry the motor housing. Store the appliance in a dry place, out of the
reach of children. If it is necessary to replace the power cord, this must be done by the manufacturer
or his agent to avoid endangering your safety.
WARNING: FOR YOUR SAFETY THIS TOOL IS DOUBLE INSULATED TO PREVENT ELECTRIC
SHOCK, FIRE AND INJURY.
* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance and
safety of the products. The parts described / illustrated in the pages of the manual that you hold in
your hands may also concern other models of the manufacturer's product line with similar features
and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection or
replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided
equipment may cause malfunctions or even serious injury or death. The manufacturer and the
importer shall not be liable for injuries and damages resulting from the use of non-conforming
equipment.
11
WWW.NIKOLAOUTOOLS.COM

Publicité

loading

Ce manuel est également adapté pour:

020356