Publicité
EN
WARNING!
Any modification of the power tool is prohibited. The use of accessories other than those
recommended in this manual may cause damage to the power tool and injury to the operator. The
power tool must be repaired by a qualified person. This power tool complies with national and
international standards and safety requirements. Repairs must be carried out only by qualified
persons and using genuine spare parts. Failure to do so may result in serious danger to the user.
Fire precautions
General fire precautions must be observed when using certain power tools in the home or workshop.
As a precaution, it is recommended to consult an expert on the acquisition and use of a suitable fire
extinguisher.
SPECIFIC SAFETY INSTRUCTIONS
BLOWER-VACUUM
WARNING!
Never allow children or persons who have not read and/or understood these instructions to use
the blower-vacuum device. Do not use the blower-vacuum for any purpose other than those
described in these instructions. Read these instructions carefully. Familiarize yourself with the
functions of the controls and learn how to use the machine properly and safely. The user is
responsible for any accidents that occur to other people or their property.
Preparation
Always wear suitable clothing, gloves and shoes. The use of approved safety glasses is
recommended. Before using the blower-vacuum, ensure that no parts are worn or otherwise
damaged. Replace any worn or damaged parts. Always check the insulation of the power cord and
extension cord used and make sure that the cord is not cut or worn. Any cable that is cut or worn
and damaged connectors must be replaced before using the blower-vacuum. For safety reasons,
always check that no material is in the unit before operation. Always check the residual current
device (RCD) before using the tool to verify that it works normally.
Only use spare parts recommended for this product. Take care when repairing or adjusting the
tool. Never use the product if it has been modified in any way.
Operation of the tool
Always check the area where you are going to use the tool for cables and other obstacles, etc., which
can damage the unit and cause injury to the operator. Never feed hard objects such as stones,
bottles, cans or pieces of metal into the tool. They may damage the machine and possibly injure the
operator and bystanders. Never use the tool if there are people, especially children or animals, in the
vicinity. Never allow any person unfamiliar with these instructions to operate this tool. Avoid
operating the tool in wet conditions wherever possible. Learn how to quickly stop the tool in an
emergency.
Never operate the tool if any of the guard is damaged, incorrectly installed or not fitted. Ensure that
you have adopted a safe posture before using the tool. Ensure that all nuts and bolts are securely
tightened before starting the tool. Use the tool only in a dry environment. Do not use the tool if it has
a defective safety device or if a protective part is missing.
7
WWW.NIKOLAOUTOOLS.COM
Publicité
