Télécharger Imprimer la page

Powersmart HB2802A Manuel D'instructions page 9

Publicité

OPERATION
WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to
do so could result in objects being thrown into your eyes and other possible serious injuries.
WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious personal injury.
To Install Battery Pack
When not in use, battery pack should be stored in an enclosed area where the temperature will not drop below -4°F
(-20°C). Optimal charging temperatures are between 32°F (0°C) and 122°F (0°C - 50°C).
WARNING: If any parts are broken or missing, do not attempt to attach the battery pack to the snow
blower or operate the snow blower until the broken or missing parts are replaced. Failure to do so could
result in serious injury.
1. Open the battery compartment cover and slide the battery vertical down as Fig. 2 shows.
2. Insert the safety key into the slot and close the battery compartment cover as Fig. 3 shows.
Fig.2
To Remove Battery Pack
1. Remove safety key.
2. Press and hold the battery latch button at the bottom of the battery pack.
3. Remove battery pack from the product.
NOTICE: Make sure that the latch on the snow blower snaps into place and that the battery pack is secured to
the unit before starting operation.
Fig.3
9

Publicité

loading