Publicité
KNOWING YOUR SNOW BLOWER
Please use the illustration below to familiarize yourself with the location and function of the components that
control of your snow blower.
1
Auger Control Trigger
2
Safety Button
3
Knob
4
Lower Handle
5
Wheel
6
Auger
7
Deck
Safety Button
Located on the right of the panel,the safety button must be pressed down before motor can be started.
Auger Control Trigger
Located on the right side of the panel, the Auger Control Trigger is used to engage and disengage the augers.
Squeeze the Auger Control Trigger to engage the augers; release to disengage the augers.
Clean-out Tool
The chute Clean-out Tool is conveniently fastened to the rear of the auger housing with a mounting clip. It
is used to clean the chute assembly and chute opening when snow and ice become lodged.
WARNING! Never use your hands to clear a clogged chute assembly. Shut off machine and remain behind
handles until all moving parts have stopped before unclogging.
8
Chute
9
Chute Control Handle
10
Upper Handle
11
Battery Box
12
Battery Pack
13
Charger
14
Clean Out Tool
8
Publicité
