Publicité
INTRODUCTION
Thank You for Purchasing a PowerSmart
operation and maintenance of this product. Every effort has been made to ensure the accuracy of the
information in this manual. PowerSmart
time without prior notice.
Please keep this manual available to all users during the entire life of the snow blower.
This manual contains special messages to bring attention to potential safety concerns, snow
blower damage as well as helpful operating and servicing information. Please read all the
information carefully to avoid injury and machine damage.
QUESTIONS? PROBLEMS?
Please contact our Customer Service Dept. with any questions and/or comments, either by Email:
support@amerisuninc.com, or Toll Free at (872) 314-0005. We are available Mon-Fri 9am-5pm EST to help
solve any issues that you might encounter.
SAFETY INFORMATION
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the
explanations with them deserve your careful attention and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper
accident prevention measures.
WARNING : Be sure to read and understand all safety instructions in this Operator's Manual, including
all safety alert symbols such as "DANGER," "WARNING," and "CAUTION" before using this tool.
Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION.
May be used in conjunction with other symbols or pictographs.
WARNING: The operation of any power tools can result in foreign objects being thrown into
your eyes, which can result in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields and a full face shield when
needed. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
®
Product. This manual provides information regarding the safe
®
reserves the right to change this product and specifications at any
4
Publicité
