Télécharger Imprimer la page

Moser 4415 Mode D'emploi page 8

Pince à gaufrer

Publicité

ENGLISH
· Never use the appliance if it is defective, if it has fallen onto the floor or if the mains cable
de
is damaged. A damaged mains cable may only be replaced with an original replacement
cable by an authorised Service Centre or another similarly qualified person, in order to avoid
en
hazards.
· Repairs may only be performed at an authorised Service Centre using original parts. Only
fr
specialists properly trained in the handling of electrotechnical appliances may repair electrical
equipment.
· Only use accessories recommended by the manufacturer.
it
· When disconnecting the appliance from the mains, never pull on the mains cable or on the
appliance itself.
es
· Do not hold the appliance by the mains cable to carry it and do not use the cable as a
handle.
pt
· Do not wind the mains cable around the appliance.
· Keep the mains cable and appliance away from hot surfaces.
nl
· Make sure that the mains cable is not twisted or kinked when used and stored.
· Never use the appliance where aerosol (spray) products are being used or where oxygen is
sv
released.
· Do not expose the appliance to temperatures below 0°C and above +40°C for any length of
time. Avoid direct exposure to sunlight.
no
· The appliance is safety insulated and radio screened. It meets the requirements of EU
Directive 2004/108/EC regarding electromagnetic compatibility and EC Low Voltage Directive
fi
2006/95/EC.
· We are not liable for damage caused as a result of improper use or failure to observe these
tr
operating instructions.
pl
Operation
· Connect to the mains power supply.
cs
· Using the on/off switch (E), switch on the appliance (Fig. 1ⓐ). LED display (F) is red.
· Set the desired temperature (150℃-230℃).
To increase the temperature, move the temperature controller in a clockwise direction
sk
(Fig. 2ⓐ).
To reduce the temperature, move the temperature controller (D) in an anticlockwise direction
hu
(Fig. 2ⓑ).
· Once the operating temperature has been reached, the LED display (F) flashes.
sl
· After use, switch off the appliance with the on/off switch (Fig. 1ⓑ). The LED display goes
out.
ro
· Disconnect from the mains power supply.
· Allow the appliance to cool down.
bg
CERAMIC-coated heating plates
Negative ions have an antistatic effect and are gentle to the hair. They close the scale layer,
ru
creating a smooth, silky hair surface and lock in the natural moisture of the hair, thereby creat-
ing the ultimate shine.
uk
el
ar
8

Publicité

loading