Publicité
PREPARATION FOR USE
WINDING – TIME-SETTING
NB : mechanical watches endowed with a date indicator window are equipped
with a complex mechanism that is set into motion between 8 pm and 3 am. It is
therefore vital to avoid adjusting the calendar or moving the time backwards
during this period.
1. Wind the watch through approximately 40 clockwise turns of the
crown.
2. Pull the crown out to position 2, turn it clockwise to adjust the
calendar to the day prior to the activation date.
3. Pull the crown out to position 3. Turn the hands forward until the
correct date jumps into place, at midnight. Then adjust the hour
and minute.
4. Push the crown back into position 1.
14
USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3 shows the
measurement in seconds.
2. Stop the measurement by pressing pushpiece A once more.
The measurement is made in hours (totalizer 1), minutes
(totalizer 2), seconds and
/
of a second (hand 3).
1
4
3. Reset the chronograph to zero by pressing pushpiece B.
BR-ME Avenger Chrono GMT45_face_v2.indd 1
BR-ME Avenger Chrono GMT45_face_v2.indd 1
15
15
Publicité
