STOK QUATTRO SGP4033N Manuel D'utilisation page 13

 Install the washer, lock washer, and hex nut onto the post.
Securely tighten but do not overtighten.
 Align the holes in the hood with the holes in the firebox.
 Insert the hood bolt (DD) through the hole in the hood
and into the hole in the firebox.
 Slide the flat washer (CC) and lock washer (BB) onto the
hood bolt.
 Securely tighten the hood nuts (AA).
STEP 7: INSTALLING HEAT TENTS
See Figure 11.
Heat tents work to evenly distribute heat inside the grill. Do
not grill without the heat tents installed.
 Fully raise the hood.
 Carefully place the heat tents over the gas burners.
HOOD
Fig. 11
ASSEMBLY
STEP 8: INSTALLING GRATES AND GRATE
INSERTS
See Figures 12 - 13.
 Fully raise the hood.
 Carefully lay grates inside the grill assembly.
 Set a round grate insert in the hole of each of the grates.
HEAT TENTS
Fig. 12
GAS
BURNER
13 - English
GRATES
GRATE
INSERTS