Samsung NX58J5600S Serie Mode D'emploi page 74

How to delay the start of self-cleaning
1. Make sure the oven door is completely closed.
2. Press the SELF CLEAN pad on the oven control panel.
Press the pad once for a 2-hour cleaning cycle, twice
for a 3-hour cleaning cycle, or three times for a 4-hour
cleaning cycle.
The display will show Clean, and the Start indicator
will blink under the selected cleaning cycle time.
3. Press the DELAY START pad.
The display will show Delay and -- --.
4. Press the number pads to set the time you want the
oven to turn on, e.g., 4, 3, 0.
The Start indicator will blink under the selected delay
start time and Delay on the display.
5. Press the START/SET pad.
The display will show the Delay Start time and the Lock
icon. The oven door lock will engage automatically.
When the start time is reached, the oven will turn on
automatically and start the programmed cleaning cycle.
74_ maintaining your appliance
User manual NX58H5 Series_DG68-00526A-02_EN+CFR.indb 74
hr
hr
2015-06-25 11:03:51