Samsung NX58J5600S Serie Mode D'emploi page 73

How to set the oven for self-cleaning
1. Make sure the oven door is completely closed.
2. Press the SELF CLEAN pad on the oven control panel.
Press the pad once for a 2-hour cleaning cycle, twice
for a 3-hour cleaning cycle, or three times for a 4-hour
cleaning cycle.
Pressing the pad a fourth time will reselect the 2-hour
default time.
The display will show Clean, and the Start indicator
will blink under the selected cleaning cycle time.
3. Press the START/SET pad to start the cycle.
The display will show Clean and the selected cleaning
cycle time, and the Lock icon will blink until the door is
locked. Then the Lock icon will stay on until the cycle is
over and the oven temperature is below 350 °F (177 °C).
The oven temperature will rise and hold the preset
self-clean temperature for the duration of the selected
cleaning cycle. The display will count down the cleaning
cycle in minutes and hours.
When the time elapses, the oven will turn off and beep
6 times. End will show in the display and the Lock icon
will blink. When the oven temperature falls below 350 °F
(177 °C), the door unlocks and the Lock icon turns off.
4. Press the OFF/CLEAR pad.
The display will go back to showing the time of day.
User manual NX58H5 Series_DG68-00526A-02_EN+CFR.indb 73
maintaining your appliance _73
hr
hr
hr
2015-06-25 11:03:50