removing the Gliding rack
•
With the Sliding rack in the "Closed" position and the oven off and cool, grasp
the rack and frame and pull both forward to remove.
Do not install the Gliding rack directly above the Flat rack and Recessed rack.
You will not be able to install it properly and the rack could fall.
CAUTION
You can install the Gliding rack in any rack positions except the highest (level 7)
and lowest (level 1) rack position in the oven.
oVeN VeNt
The oven vent is located under the oven
control panel. Do not block or place items in
front of the oven vent. Proper air circulation
prevents oven burner combustion problems
and ensures good cooking results. Since the
vent and area around the vent can become
hot, use care when placing items near the
oven vent. Hot steam could heat or melt items
placed in front of the oven vent.
oVeN LiGHt
The oven has a light that is located on the
rear oven wall in the upper right-rear corner.
The light can be turned on or off by touching
the OVEN LIGHT pad on the oven control
panel. The oven light allows you to check
cooking progress without opening the oven
door. Always use a 40-watt appliance bulb
when replacing the oven light.
See page 61 for light-changing instructions.
User manual NX58H5 Series_DG68-00526A-02_EN+CFR.indb 35
oven vent
oven light
operating the oven _35
2015-06-25
11:03:23