Publicité
SPA FUNCTIONS
Turn On Pump
Press the "Jets" button to
turn the pump on low speed.
Press the button again for
high speed
SET TIME
To set the hour, continue to hold down the "Light"
button until the hour is flashing, then use the arrow
keys to adjust the number. Press the "Light" button
again for the minutes and repeat. Press "Light" once
more to complete
Control Centre Guide
YOUR IN.K300 CONTROL CENTRE
Jets
Light
Indicator lights
A B C D
Turn On Lights
Press "Light" button to
activate lights. Press
"Light" button again to
turn them off
Temp Up
Temp Down
A -
Heat: Indicates that the heater is on
B -
Filter: Spa is in automatic filtration mode
C -
Temp Set: When water temperature is set
D -
Time: Morning or afternoon indicator
SETTING THE TEMPERATURE
Press the "Temp Up" or
"Temp Down" button to set
desired temperature while
the numbers are flashing
SET TEMP UNIT OF MEASURE
The water temperature can be displayed in either
Fahrenheit (°F) or Celsius (°C). Press and hold the "Light"
button to enter the menu. Press the "Light" button
repeatedly until you see either F or C. Use the "Temp Up"
or "Temp Down" button to adjust. Press "Light" to set
10
When the flashing stops, the
temperature is set and will
show the current temperature
of the water
Publicité
