Publicité
en-us Installation procedure
If the inside of the cabinet is no wider than
¡
29 ½" (750 mm), make cutouts in the side panels.
min. 3¾"
(95)
If the appliance is installed in an island unit or another
¡
installation that is not described here, you must ensure
that the cooktop is sufficiently ventilated.
4 Installation procedure
Installation procedure
Follow these instructions to install the cooktop into the
Installation procedure
countertop.
CAUTION
Sharp edges.
Use protective gloves when installing the appliance.
▶
CAUTION
The appliance is heavy.
It is recommended that two people install this appliance.
▶
4.1 Installing the heat shield
For safety reasons, the heat shield must be properly in-
stalled when closed cabinets are used. This prevents com-
ponents from overheating as a result of the recirculation of
hot air from the cooktop. The heat shield is the same width
as the cooktop.
CAUTION
Sharp edges.
Use protective gloves when installing the heat shield.
▶
Requirement: You have unpacked the cooktop.
8
For shipping, the heat shield is screwed to the bottom of
▶
the cooktop. Unscrew the fastening screw on heat
shield.
The heat shield will be able to rotate freely.
a
4.2 Attaching the sealing tape for flush in-
stallation
Attach the adhesive sealing tape around the edges of
▶
the countertop cutout.
Note: Do not apply the sealing tape to the cooktop.
Publicité
