Publicité
en-us Prepare installation space
If the thickness of the countertop into which the cooktop
¡
is installed does not comply with the specifications, rein-
force the worktop using a fire- and water-resistant mate-
rial until it reaches the minimum thickness. Otherwise,
sufficient stability cannot be assured.
The countertop into which the cooktop is installed
¡
should withstand loads of approx. 133 lbs (60 kg).
Confirm the cooktop is level only after it has been in-
¡
stalled.
3.1 Flush mounting
The cooktop can be mounted flush into the countertop.
Notes
Any cutout work on the countertop must be performed
¡
in a workshop according to the installation diagram.
The cutout edge is visible on the surface after installa-
¡
tion. Ensure that the cutout is made cleanly and pre-
cisely.
Clean and degrease the cutout edges with a suitable
¡
cleaning agent; follow the silicone manufacturer's pro-
cessing instructions.
Countertop material guide for flush mounting
Refer to the following chart to see if flush mounting is pos-
sible. All countertop materials must be temperature- and
water-resistant.
Countertop
Notes
material
Stone
Suitable for flush mounting
Plastic, such as
Suitable for flush mounting
Corian®
Solid wood
Only in consultation with the manufac-
turer of the countertop. Seal cutout
edges.
Tiled surfaces
Suitable for flush mounting
If necessary, raise the support surfaces
using heat and water resistant strips.
( ) = mm
Other
Only in consultation with the manufac-
turer of the countertop.
Particle board
Not suitable for flush mounting.
3.2 Cutout dimensions for flush mounted 30"
cooktops
Refer to these measurements for the models stated here.
CI 282 602
¡
6
⁴/16"
+0.02"
(6.5
+0.5
)
+0.02"
⁴/16"
(6.5
+0.5
)
3.3 Cutout dimensions for flush mounted 36"
Refer to these measurements for the models stated here.
¡
cooktops
CI 292 602
Publicité
