Publicité
6.1
Oil bath gear
The gear oil should be changed after the first 100 hours of operation. Ensure that this work is carried out
in a specialist workshop, or proceed as follows:
Clamp the machine vertically in the vice.
Remove the three hexagon socket screws (item 161).
Take off motor and intermediate cover (item 2).
Change gear oil - use only original oil (no. 9030001).
The filling quantity is 300 - 310 ml.
To reassemble, proceed vice versa and ensure that the shim ring (item 150) is on the front shaft (item
196).
ATTENTION: If gear oil escapes, stop the machine immediately. Leakage of oil damages the gear.
6.2
Water connection
If water escapes from the overflow hole on the water connection ring (item 91), the rotary shaft seals
(items 131 + 133) must be replaced immediately. This should only be done in an authorised specialist
workshop.
6.3
Carbon brushes
The carbon brushes should be examined for wear after about 300 hours in operation, and replaced if
necessary. As with all other work on the motor, this should only be carried out by an electrician.
7.
G U A R A N T E E
We will guarantee the WEKA core drilling machine for 12 months from the day of delivery. During this
period we will rectify material and production defects free of charge. This warranty does not cover normal
wear and tear, overloading, non-compliance with the operating instructions and intervention by
unauthorized persons or the use of parts from other companies.
8.
D E C L A R A T I O N O F C O N F O R M I T Y
Description:
Diamond core drill - for drilling holes in concrete, stone and masonry
Type:
DK22, DK32, DK34 (and versions)
from serial no.:
0110001
We hereby declare under our sole responsibility that this product conforms with the following standards:
EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, EN61029-1, EN61029-2-6 in accordance to the
regulations of directive 2006/42/EG and 2004/108/EG.
WEKA Elektrowerkzeuge
Auf der Höhe 20
D 75387 Neubulach
9.
R E C Y C L I N G
According to the European regulation 2002/96/EG we have to take back old machines for
departing them by substance and for recycling (see sign on name plate). Please make sure
that the old tool does not get into the unsorted municipal solid waste, but that they are given
back to us, resp. abroad to our distributors.
Neubulach, 29.12.2009
Wilhelm Wurster, Owner
Übersetzung der Originalbetriebsanleitung - Subject to change without notice 0510
13
Publicité
