Publicité
MAKING ICE CUBES
F
ill the ice cube tray (not supplied) with ¾ full of drinking
water and place in the ice box compartment.
tray is stuck to the ice box compartment, loosen with a blunt
tool only.
T
o loosen the ice cubes, twist the ice cube tray slightly or hold
briefly under flowing water.
NOTE:
T
his ice box compartment is not a true freezer compartment
and may not freeze items.
T
he temperature in this compartment does not get cold
enough to freeze food safely.
other items in the fridge may also be affected.
DEFROSTING THE ICE BOX
The ice box will need defrosting periodically or when the frost is more than 3mm thick.
1. Unplug the appliance.
2. Remove the ice tray.
Ensure the drip tray is located correctly under the ice box.
3. When ice box is fully defrosted, clean the inside (see 'Cleaning and
maintenance').
4. Close the door and plug the appliance in.
5. Set the temperature control knob to the normal setting.
DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call your local
authorised service agent to make this conversion or ask a technician.
Before you reverse the door, you should ensure the appliance is unplugged and empty. It is
recommended to use a crosshead screwdriver and a spanner (both not supplied).
A
colder setting can be used, but
GB-10
I
f the ice cube
Publicité
