Publicité
INSTALLATION
Install the appliance in a dry, well ventilated room. The installation location should neither be exposed
to direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of
the cabinet.
For uneven surfaces, front feet can be aligned.
AMBIENT TEMPERATURE
This appliance is designed to operate in ambient temperature between 16°C and 38°C. If these
temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly. If the
ambient temperatures are exceeded for long periods, the temperature in the fridge will rise above 4°C
and food spoilage may occur.
BEFORE PLACING FOOD IN THE FRIDGE
Remove all packaging.
Allow the appliance to run empty for 2 – 3 hours so the compartment can cool to the appropriate
temperature.
Clean the inside of the appliance with warm water and a little liquid detergent to remove
manufacturing and transportation dust.
TEMPERATURE CONTROL
The fridge is controlled with a temperature control knob located inside the appliance.
Adjust the control knob as desired to suit your individual preference.
GB-6
Publicité
