Subaru 3301437 Instructions D'installation

INSTALLATION INSTRUCTIONS
KIT CONTENTS:
Rear Door Protector, LH
Rear Door Protector, RH
TOOLS REQUIRED: None
Caution: Not suitable for use with aftermarket or dealer-installed window tinting. This product may scratch window
films.
Warning: Not for use with human passengers; product interferes with access to door handle and window controls.
INSTALLATION
Step 1. Hold door protector in front of door panel,
with clips at top and woven backing facing door panel.
Step 2. Align front edge of door protector (edge facing
front of vehicle) to the front edge of door panel, and
then carefully insert the 3 clips in between the glass and
felt seal at the base of the window. Push down on each
clip until it engages or bottoms out. Do not use
excessive force.
Step 3. Ensure that top of the door protector lies flat
and that all clips are inserted to the same depth. Check
overall alignment and coverage. Reposition if necessary.
REMOVAL
To remove, reverse the installation process. Remove
clips vertically. DO NOT pull the door protector or clips
away from the door or window.
CLEANING & STORAGE
Wipe clean with a soft cloth, water, and mild soap, rinse
well, lay flat to dry. Do not machine wash. Store the
door protector flat, ensuring that no part of the door
protector is bent or stressed. Store in a cool, dry place.
DESCRIPTION
Pet Rear Door Protector
3301437
DESCRIPTION: Pet Rear Door Protector
ISSUE
00 2021/04/06
DATE
SUBARU OF AMERICA
PAGE
1 / 2