Télécharger Imprimer la page

SilverCrest SCP 10000A1 Instructions D'utilisation Et Consignes De Sécurité page 26

Publicité

Immediately switch the product off and remove the charging
cable from the product if you smell burning or see smoke.
Have the product examined by a qualified technician before
using it again.
If you use a USB power supply, the socket used must always
be easily accessible so that the USB power supply can
be quickly removed from the socket in the case of emer-
gency. Please also refer to the manufacturer's instruction
manual.
Observe the usage restrictions and prohibitions of use for
battery-operated products in situations which may be haz-
ardous such as at petrol stations, airports, hospitals, etc.
WARNING! During charging process, please be
noticed that the product must not be covered. There is a
risk of warming and overheating.
Operation and use
Charging the power bank
The built-in rechargeable battery must be fully charged before
using the product.
To charge the power bank
with an output voltage of 5 V and an output current of
at least 3 A.
ATTENTION! Due the high power consumptions, the
power bank must not be charged from a PC or notebook.
Connect the USB type A to micro USB cable with
adapter to USB type C
the power bank
can also be used for charging the power bank. In this
case, the micro-USB-USB type C adapter must be re-
moved from the cable.
26 GB/IE
only use power supplies
6
with the USB-C Input
7
. Alternatively, the micro-USB input
6
of
3
2

Publicité

loading

Ce manuel est également adapté pour:

334270 1907