Publicité
Connecting with Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi
Home/Xiaomi Home app to control your device, and to interact with other
smart home devices.
Scan the QR code to download and install the
app. You will be directed to the connection
setup page if the app is installed already. Or
search "Mi Home/Xiaomi Home" in the app
store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then
follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of
the app displayed on your device should be taken as the default.
Notes:
• The version of the app might have been updated, please follow the instructions based
on the current app version.
• If the robot vacuum's QR code cannot be scanned, you can search for its name to add it.
• When connecting the robot vacuum to the Mi Home/Xiaomi Home app using an iOS
device, follow the instructions in the app to connect to the robot vacuum's hotspot
"xiaomi-vacuum-b106eu_mibtxxxx".
Rese ing Wi-Fi
While the robot vacuum is turned on, press and hold the bu ons
for seven seconds. The Wi-Fi is successfully reset when you hear a voice
prompt.
Rese ing System
Press and hold the bu on
for five seconds until you hear a "beep",
and then press and hold the bu on
hear the voice prompt. The robot vacuum then restarts, and se ings
like scheduled cleaning and Wi-Fi are restored to factory default.
578BCC56
and
for five seconds again until you
Common Issues
The robot vacuum
cannot connect to
Wi-Fi.
The robot vacuum cannot
connect to the
"xiaomi-vacuum-b106eu_mibt
xxxx" network in the Mi
Home/Xiaomi Home app.
08
Possible Causes and
Solutions
Check whether the Wi-Fi password
is correct.
The robot vacuum does not
support the 5 GHz network
frequency band. Please use a 2.4
GHz network.
The Wi-Fi signal is weak. Make sure
the robot vacuum is within the Wi-Fi
coverage with a strong signal.
There is something wrong with the
Wi-Fi connection. Reset the Wi-Fi
and download the latest version of
the Mi Home/Xiaomi Home app,
then try reconnecting.
Make sure the robot vacuum is
within the Wi-Fi coverage with a
strong signal, then reset the Wi-Fi
of the robot vacuum and reconnect
to the network.
Publicité
